The impact crusher is more effective when processing materials with large water content

The impact crusher is more effective when processing materials with large water content

The impact crusher is called impact crusher. It is mainly used for crushing building materials, metallurgy, chemical industry, hydropower, etc., especially broken stones such as broken railways, highways, hydropower projects. The launch of the impact crusher has attracted the attention of users and has been widely used. Why use an impact crusher? what is the benefit？

First of all, the impact crusher is more effective when processing materials with large water content, effectively preventing the material from clogging.

When the moisture content of the treated material is too large, the feed tank and the counter-pressure plate of the crusher can be equipped with heating devices to prevent the material from sticking. The impact crusher does not need to be equipped with a bottom screen to prevent clogging. Secondly, the impact crusher is suitable for a wider range of materials.

The hammer is fixed to the rotor by a mechanical clamping structure, and has a large moment of inertia when rotating with the rotor. Compared with the hammer crusher (the hammer is in a suspended state), the rotor of the impact crusher has a larger momentum and is suitable for crushing hard materials.

Adjusting the discharge particle size can be convenient and flexible, and the adjustment range is wide. The discharge particle size can be adjusted in various ways, such as adjusting the rotor speed, adjusting the gap and the gap of the grinding chamber. The wearing parts of the impact crusher are small, and the metal utilization rate is high.

Wear is only on the side facing the material. When the rotor speed is normal, the feed will fall to the surface of the hammer (impact surface), and the rear and sides of the hammer will not wear. Even one side of the material wears very little. The bottom grinding rod is also easy to replace. The metal utilization rate of the flat hammer of impact crusher can be as high as 45%-48%.

Replacing spare parts for the impact crusher is simple, and maintenance costs are reduced accordingly. Only six hammers were installed on the rotor of the crusher. The hammer can be easily replaced with special tools. It only takes one shift to change the hammer.